| | | | | | | | | | | | | | | awszt-cv 3.7 x 3.1 mm smd ceramic resonator electrical characteristics: ? remote controls, microprocessor clocks, mobile phones, dvd & cd-roms, electric appliances ? consumer electronics ? ir reflow capable ? low cost features: ? low resonant impedance applications: rohs compliant test condition and test circuit: options & part identification: pb in ceramic (exempt per rohs 2002/95/ec annex (7)) 30332 esperanza, rancho santa margarita, california 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com revised: 09.02.10 visit www.abracon.com for terms & conditions of sale packaging frequency in mhz t for tape and reel frequency awszt - xx.xxcv - * please contact abracon for tighter stability and/or wider temperature range. 3.7 x 3.1 mm abracon is certified abracon is iso9001:2008 certified parts shall be measured under a condition (temp.: 2015c, humidity: 6520% r.h.) unless the standard condition (temp: 253c, humidity: 6510% r.h.) is regulated to measure (1) d.c.voltage 6 v.d.c. max 0.4% max. (8.00mhz~13.00mhz) withstanding voltage insulation resistance 50v (dc , 1 min) rating voltage 100m ? min. (10v, 1min) operation temperature (2) a.c. voltage 15 vp-p. max 0.3% max. (from initial value) -25oc to +85oc storage temperature -55 o c to +85 o c aging rate (fosc) frequency tolerance 0.5% see table below ntemeriuqer meti 8.00mhz to 13.00mhz resonant impedance frequency range 16.00mhz to 50.00mhz frequency stability (-25oc to +85oc) 0.3% max. (16.00mhz~50.00mhz) frequency range (mhz) resonant impedance (ro)( ? ? ) max load capacitance for test circuit c1=c2 (pf) 8.00 mhz - 13.00 mhz 30 max 30 16.00 mhz - 20.00 mhz 40 max 30 20.01 mhz - 25.99 mhz 40 max 15 26.00 mhz - 50.00 mhz 40 max 5 x: ceramic resonator c1=c2: 30pf 20% (8.00mhz~13.00mhz) 30pf 20% (16.00mhz~20.00mhz) 15pf 20% (20.01mhz~25.99mhz) 5pf 20% (26.00mhz~50.00mhz) awszt-cv
|||||||||||||| | awszt-cv 3 . 7 x 3.1 mm smd cer a m i c r e s o nat o r rohs compliant pb in c er amic (ex empt per rohs 2002/95/ec annex (7)) 3033 2 e s p e ranza , ra n c h o s a n t a mar g a rita , c alif o r n i a 9268 8 t e l 949- 546- 8000 | f a x 949- 546- 800 1 | w w w . abra c o n . c o m revised: 09 .02 .10 visit www.abracon.com for terms & conditions of sale re co mme n de d l a nd p a tte rn 0.7 0.2 0 . 7 0.2 4.1 0.2 3.0 0.2 blan k p ocket 10 p i tche s loa ded p ocke t blan k poc ket 1 0 p i tch e s leade r 2 0 0mm m a x p eelin g s t r e n gth 20- 70g c a r r ie r tap e t op tap e 1 0 max a b w t p ieces p e r r e e l c a rrier tape s ize 180 3 60min 12. 4min 1 9.4max 1 0 0 0 t y p . 12 3 . 7 x 3 . 1 m m a wszt -cv (1.0+a) 0.2** dimensions: mm outline drawing: dimensions: mm tape & reel: (1,000pcs/reel) abracon is cer tified abracon is iso9001:2008 cer tified ** a stands for the thickness of the ceramic element, which varies with the frequency
abracon is iso 9001 / qs 9000 cer tified 3033 2 e s p e ranza , ra n c h o s a n t a mar g a rita , c alif o r n i a 9268 8 t e l 949- 546- 8000 | f a x 949- 546- 800 1 | w w w . abra c o n . c o m revised: 09.02.10 visit www.abracon.com for terms & conditions of sale abracon is cer tified abracon is iso9001:2008 cer tified reflow profile: |||||||||||||| | awszt-cv 3 . 7 x 3.1 mm smd cer a m i c r e s o nat o r rohs compliant pb in c er amic (ex empt per rohs 2002/95/ec annex (7)) 3 . 7 x 3 . 1 m m a wszt -cv ? do not apply excess mechanical stress to the component body or terminations. do not attempt to re-form or bend the components as this will cause damage to the component. ? this component is not hermetically sealed. do not clean or wash the compon ent. ? reflow soldering: do not use strong acidity flux ,such as flux with chlorine content of greater than 0.2wt% during reflow soldering. ? do not expose the component to open flame. ? this specification applies to the functionality of the component as a single un it. customers are advised to insure that the component is thoroughly evaluated in the particular application. ? shelf life: the warranted shelf life of this product is six months after the delivery date under the conditions of sealed, unopened, original packaging. ? storage conditions: if the product is to be stored for a period greater than six months after the delivery date, it is recommended that customers confirm the solderability and characteristics for the product prior to use. ? this product is not recommended for use in the following applications: automotive, medical, militar y , safety , or any other high-reliabilit y , life-dependant application. contact abracon corporation prior to using this product when in doubt. caution p eak :26 0max 2 5 0 p r e - h e a t i n g 1 0s max w ith i n 80- 120 s . w i thi n 2 0 -40 s 30s min 2 3 0 1 5 0 1 0 0 attention: abracon corporation?s products are cots ? commercial-off-the-shelf products; suitable for commercial, industrial and, where designated, automotive applications. abracon?s products are not specifically designed for military, aviation, aerospace, life-dependant medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. for applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from abracon corporation is required. please contact abracon corporation for more information.
|
